Garrett CHRA T3/T4E Journal Bearing Turbo

Description

CHRA – Garrett T3/T4E JOURNAL BEARING Stage III turbine wheel select comp. Trim 50 trim 57 trim or 60 Trim. This is essentially a brand new turbo but without the end housings (Turbine housing and compressor housing). This is the quickest and most reliable way to “rebuild” your turbo and make it “as new” again. The “CHRA” is a Center Housing Rotating Assembly which is a Garrett Factory assembled and balanced “unit” consisting of a NEW Bearing housing along with all new internal parts to the turbo such as turbine wheel/shaft compressor wheel entire bearing system and seals etc. You simply buy the NEW CHRA that matches the wheel combo that you’re currently using then simply transfer your current housings by unbolting it via the 6 bolts that hold the housing on to each end of the bearing housing. Reference for Garrett shelf T3/T4E turbos: 50 TRIM IS: 466159-5011S OR 445074-0057 57 TRIM IS: 466159-5003S OR 466159-5005S OR 445074-0032 60 TRIM IS: 466159-5004S OR 466159-5008S OR 445074-0033