ISC Suspension N1 Coilovers – 05-10 Scion tC

Description

Street Comfort and Street Sport Spring Rates: Length-F-kg: 180-10, Length-R-kg: 135-10

Track / Race Spring Rates: Length-F-kg: 180-12, Length-R-kg: 140-12

Description: 

The ISC N1 coilover is the optimum suspension tool for improved handling for your street or weekend track car. This product is perfect for someone looking for performance, adjustability, height and dampening and other quality features.

Our self-manufactured ISC N1 allows us to have top grade quality control, and innovative R&D capabilities due to our in house/ self-made company dynamic. ISC has been present for over 12 years in Asia and Australia, which accomplished drift, road course, street enthusiasts and podiums alike. Over a decade of experience and feedback has allowed the ISC N1 to evolve into what it is today.

Specs:

• 6061 Aluminum
• Top Grade Hardware, Pillowball Bearings
• StreetSeal™ corrosion protectant technology
• Anodized Finish
• Light weight
• Large Adjustment Range

Details:

• SO9001:2000R Certified
• ARTC Certified
• 5 Year Warranty: All service, rebuilds and warranty support are done here in our USA facility. All custom coilover orders are hand assembled here in our New Hampshire location. ISC reaches to have some of the best customer service in the industry.

32 Step Damper Adjustable:

• Rebound/ Compression adjusted in unison via 32 step adjustment.

Pillowball Upper mounts:

• For optimal performance Pillowball Upper mounts are a great feature. ISC Coilovers include pillowball upper mounts on all N1’s.

Thrust Bearing Kit:

• We will not charge you 50.00- 100.00 to upgrade to a thrust bearing kit, these are a FREE upgrade on all ISC N1’s. This helps eliminate the chance of spring bind; a common side effect of running aftermarket coilovers.

Front Camber Plates:

• When your vehicle’s suspension geometry allows (vehicle specific, please check our application guide) all ISC N1’s come with adjustable camber plates standard.

Piston Rod Design:

• High rigidity steel piston rods
• Meets with race/sport standards
• Shafts are valved according to the spring rate you choose. A Shock Dyno is used to ensure quality and consistent results.

Single Cylinder Design:

• Larger cylinder and piston design to advance driving stability and dexterity.
• Mono-Tube damper with high pressure nitrogen.
• Threaded portion of shaft is powder coated then salt spray coated for optimum street durability- We suggest also using anti seize or other protective products when you install your coilovers for even further protection from the elements if you are exposed to snow and salt.

Sports Spring:

• Made from high quality SAE9254 steel
• Dyno tested over 500,000 times on compression inspection with less than 5% deformation.

Fully Custom Spring Rates/Valving:

• Street Comfort, Street/Sport or Track/Race (spring rates vary depending on application, custom spring rates are available).
• We understand each driver has unique demands are happy to offer you a custom set for your vehicle.

Ride Height Adjustable:

• Full length height adjustable- 3 inches or more on most applications.
• High quality T6061 aluminum alloy used for all adjustment locks to provide a lightweight design that holds spring and vehicle down force.

Bound Adjustable with Separate Spring Locks:

• Preload is separate from ride height; the lower you go the ride quality stays the same!

Aluminum Brackets:

• Made from T6061 aluminum alloy by organic shaping to lighten weight and increase handling performance.
• ISC Gold or Black anodized surface to help prevent inside corrosion and surface rust.
• Brake lines and mounting brackets are welded onto the bottom mounts in most applications for an OEM type installation and fitment.